What exactly is the error code B200?
Typically the error code b200 on the Canon Pixma MX922 printer will indicate a defective print head.
What are the main reasons for having the error b200 on this Canon Pixma Mx 922 Printer?
An error code of 200 visible in Canon printer models may affect the speed of printing and the process. This could be due to a few crucial reasons listed below.
- Drying up cartridge
- Replica ink cartridge
- Overheating
- The cartridges are jammed
- Waste tank filled
Dried up cartridge
If you don’t use your printer for a prolonged period and then return to it, the error Canon b200 could be observed. The Canon Pixma G3400 Error Code B200 is compatible with two kinds of cartridges that are two and 4+, and both will run dry if not utilized for a long time.
Replica ink cartridge
Sometimes, the ink not of high quality installed in the system may cause a significant change in the system. When you put it in the design, it can ruin the experience of printing. It is recommended you make use of the original ink cartridge from the Canon printer.
Overheating
If you print more than one document at a time for a prolonged period, you can see Canon errors with printer b200 blinking on your monitor. The printer’s head gets overheated because of the excessively filled instructions, and the printer stops connecting to the cartridge. The printing ceases, and the printer displays the Canon MX922 support code B200.
Cartridges jamming
It has been discovered that jamming the cartridges of the ink section or the printer could cause many serious issues. This issue caused the paper to drip. It is recommended to clean and check the cartridge area with care.
Tank filled with waste
Canon MX922 features empty ink tanks. In the course of cleaning, it can collect and store ink waste. Canon MX922 error code b200 can occur if the tank is completed. To solve the issue, inspecting and cleaning the tank is necessary.
How do I solve the Canon B200 Error Code?
This is a complete troubleshooting procedure to fix the error code b200 in Canon printer models.
Start the printer
One of the most basic ways to eliminate the error for the Canon printer is to reboot the printer. Restart it and check if the MX922 support code b200 disappears.
Install cartridges
It is essential to follow these steps to complete the task:
- Reconfigure the cartridges. To restore the linkage between the cartridges with the printer, erase all of the old ones, change them to a fresh cartridges, and install them.
Look at your printer cartridge for more information about the problem and the solutions.
Clean and reinstall print head.
- Remove the printer head and gently clean the connections to the backside of the printer. Once everything is clean and dry, ensure the ribbon cable connector is securely connected to the printer head before reinstalling it.
- After you’ve removed the head of the printer, rinse it under hot water to wash out any remaining ink before replacing it.
Reload the driver
The result is that corrupted driver software for the printer on the system may hinder the performance of the printer system. The only solution to fix the problem with the printer driver is to restore the driver on the system.
Press the printer driver installation to obtain the relevant details.
Conclusion
Canon Pixma IP8720 Error Code B200 are known for printing high-quality images. They can also be corrected; however, you should use extreme caution when you decide to wash the head of your printer. It isn’t recommended to do this unless you have some experience with devices, or you might end up ruining the printer. Try out different methods before you settle on this one. Contact us for more assistance.